 |
 |
|
|
|
 |
4.
Start the cut at the bottom, keeping tire cut as even as possible. |
 |
5. After finishing the lower neck cut, notch the neck at the top to
give the crown someplace to fold into when you |
 |
6. The completed cuts. |
 |
7. Run a rod through the neck to apply leverage and heat the uncut area of the neck. Do not try to pull back on the
bar from the top. Have a friend stand in front of the frame and pull up on the bar until you have the desired degree of
rake. |
| More> | |
